RaceConcepts comes up with an exhaust and engine head work for the Honda CBR250R!

Bangalore based turning firm, RaceConcepts run by Joel Joseph has come up with a tuned exhaust for the Honda CBR250R, in what is one of the first made-in-India performance boosting product for this quarter liter Honda. The Honda CBR250R does have a range of aftermarket exhausts, both branded and unbranded ones in markets like Thailand and Malaysia. While the branded ones like Yoshimura are quite expensive, unbranded ones often end up lowering the performance of the motorcycle. So, Indian CBR250R owners were caught between a rock and a hard place. However, all that has now changed.

A Honda CBR250R with a RaceConcepts Free Flow Tuned Exhaust

RaceConcepts has come up with the tuned free flow exhaust for the Honda CBR250R, which is not just affordable, but which also enhances performance by quite a bit. According to Joel, the lazy motor on the CBR250R with the stock exhaust has now been transformed into a rev hungry motor with the RaceConcepts free flow exhaust. Peak power at the rear has gone up by more than 10% and this has been dyno tested, though RaceConcepts haven’t yet made the dyno sheets public.

Joel claims that the CBR250R with the RaceConcepts exhaust and head work does 24.5 Bhp at the wheel as opposed to the stock version’s 21.14 Bhp. So, that is a full 3 ponies higher than the stock motorcycle or over 15% boost in power due to the RaceConcepts exhaust and tuning work on the engine head. The RaceConcepts exhaust shod Honda CBR250R is touted to be as fast as a Kawasaki Ninja 250R.

The V-Box figures for top speed and acceleration, Joel says, will be put up shortly along with the dyno chart. Apart from the exhaust, Joel has also worked on the suspension of the CBR250R to fix the soft set up, which isn’t the best one for hard cornering. The front end’s damping has been stiffened with higher pre load. The rear end too gets a harder set up to make for more sharper handling.

To order a free flow tuned exhaust for the Honda CBR250R, you can get in touch with the folks at RaceConcepts on joel(at)raceconcepts.in or call them on +91 90607 22389. For the head job, you need to head to the RaceConcepts workshop in Bangalore.

Share and Enjoy:

January 23, 2012 | By Jay Prashanth · Tags: 2012 Honda CBR250R, Honda CBR250R RaceConcepts Tuned Free Flow Exhaust

Comments

3 Responses to “RaceConcepts comes up with an exhaust and engine head work for the Honda CBR250R!”

Gyan on January 24th, 2012 12:38 pm

What about emissions?
ralph dsouza on January 24th, 2012 6:13 pm

Isnt the stock honda cbr 250r do 25PS …i think you’ll made a mistake ..
Jay Prashanth on January 24th, 2012 6:23 pm

Ralph,

Stock CBR250R does 25 PS at the crank, not the wheel. The figures we’ve used in our story refers to hp at the wheel, which is a more valuable measure of power.

Cheers,

Jay